Base Unit
 |
Base Unit including front mating frame, bucket centering slide outs, retaining chains, knuckle and rotator system, grab handle, top tow bar, mounting hardware (U-bolts), not including axle. |
Cart Frames
 |
Short cart frame (not including axle)
| |||
 |
Low profile cart frame, with integrated axle, including 10 x 16.5 tires (do not order separate axle)
| |||
 |
Long cart frame (not including axle)
| |||
 |
Short and Long cart 6" lift spacers, set of two, including U-Bolt mounting hardware
|
Axles
 |
Narrow width axle assembly, including two-tire/wheel assemblies, 8 bolt spindle and hub assemblies and mounting hardware
Wide width axle assembly, including two-tire/wheel assemblies, 8 bolt spindle and hub assemblies and mounting hardware
|
Hose Kits
 |
Basic hydraulic hose kit including two front to back hoses with standard flat face quick couplers on both ends, hose blocks and mounting hardware
| |||
 |
Dual rear outlet hose kit including two front to back hoses, 12 vdc selector valve allowing operating of two sets of standard flat face couplers (not at the same time) hose blocks and mounting hardware (note: this system will require an electric harness kit, priced separately below)
|
Electric Kit
 |
Electric harness kit including in cab toggle switch box, multi-pin connector and mounting plate, enclosure with terminal strip at back end of top tow bar; system includes toggle switches for Main Power On, Selector Valve Energized, Flasher Lights, Auxiliary/Floods Lights. Only one electrical harness system is needed to operate any or all of the hydraulic, flasher light or flood light kits.
|
Lift Kit
 |
Hydraulic lift cylinder kit for use with platofrms and gravel box, including on e 3 1/2" x 36" cylinder, fittings, two hoses, and flat face couplers for direct hook up to basic hydraulic or dual outlet couplers.
|
Platforms
 |
Narrow width, 72" x 102", platform, including mounting hardware
| ||||||
 |
Wide width, 96" x 102", platform, including mounting hardware
| ||||||
 |
Side board kit for narrow platform including three sides, corner braces and mounting hardware
Side board kit for wide platform including three sides, corner braces, and mounting hardware |
Lighting
 |
Hazard light bars including mounting hardware (requires electric harness system) | |||
 |
Flood light kit including two lights, mounting hardware (requires electric harness kit) |
Other Attachments
 |
| |||
 |
Hay bale rail system (fits both narrow and wide platforms) | |||
 |
| |||
 |
Set of two mirrors including mounting hardware | |||
 |
Basic Water Tank including tank saddle and mounting hardware | |||
 |
Hydraulically driven centrifugal pump and plumbing system with relief valve, camlock couplers, filter, and main tank shut off valve | |||
 |
Gravel box with hydraulically operated gate latch (requires dual outlet hydraulic kit, cylinder kit, and eletrical harness kit, see above) | |||
 |
Three point hitch kit including two lift cylinders, Category I (requires basic Hydraulic hose kit, see above) | |||
 |
Hydraulically-driven Power Take Off shaft kit (requires dual rear outlet hydraulic kit, and electrical harness kit, see above) |
Bolsters
 |
Upright bolster including mounting hardware | |||
 |
Bolster roller including mounting hardware | |||
 |
Baffle plate including mounting hardware |
Safety Equipment
 |
Slow Moving Vehicle Placard With Mounting Hardware |
