| Mating Frame: |
Industry standard quick-attach system w/bucket slots and fork pockets; retainer chains.
|
| General Dimensions: |
See above sketch; 6 x 6 square tubular super-structure.
|
| Payload Capacity: |
Load capacity is 5,000 pounds or 2,275 kilograms.
|
| Travel Speed: |
Maximum travel speed is 5 miles per hour or 8 kilometers per hour.
|
| Hydraulic Couplers: |
Standard flat face couplers.
|
| Hydraulic Capacity: |
18 gallons per minute @ 3,000 psi or 68 liters per minute @ 211 kg/cm2.
|
| Electrical Interface: |
12vcd, multi-pin connector.
|
| Platform Lift Cylinder: |
3 1/2" x 36" - 1 1/2" shaft (1).
|
| Tire and Wheel Size: |
12-16.5 multi ply tired mounted on 8 bolt heavy duty hubs.
|
| Standard Platform: |
72" x 102" or 1.83 meters x 2.59 meters
|
| Wide Platform: |
96" x 102" or 2.44 meters x 2.59 meters
|
| 3-Point System |
Standard 7'8" pin Category I.
|
| PTO: |
Standard 540 6-spline male shaft, maximum horsepower output is 24 hp.
|
| Horsepower Required |
Minimum loader power required is 70 horsepower or 54 Kilowatt.
|
